|
Specializing in supplying inboard and outboard
motor parts to the do-it-your-selfer. |
|
Got a sick outboard powerhead? Before you chuck hundreds of unnecessary dollars for a pre rebuilt powerhead plus core charges and puny warranty, or pay some rediculous price plus sales tax to your local dealer, take a look...
TMS will completely rebuild your powerhead, apply a "LIFETIME WARRANTY", return your powerhead along with required mounting gaskets, carb kits, new water pump impeller and repair manual, AND *shipping both ways is included! Turn around in most cases is about 3 to 4 days but can be 4 to 5 days during busy months. We can even repair your damaged crank shaft, or minor to medium severity block damage including welding broken aluminum or replacing sleeves. Complete setup instructions will accompany your powerhead upon return. Unlimited toll free technical support is also available if needed during reinstallation of your powerhead.
TMS prides itself in quality and workmanship. We do not mass produce rebuilt powerheads to stock shelves, creating and inviting mistakes or missed damage. All powerheads are thoroughly inspected and COMPLETELY rebuilt, "one at a time", using only the highest quality replacement parts, ensuring you are getting the best of the best. "Completely" meaning, boring cylinders, ALL new pistons, rings, bearings, gaskets, etc. We refuse to turn out unreliable "partially rebuilt" junk, so please do not request anything less than "complete". We also offer high performance modifications. Give us a call for HP pricing.
Our "lifetime" warranty statement is here
**Below are our prices for standard complete 2 stroke powerhead overhauls, including exclusive lifetime warranty and both ways shipping
Please note: These services are offered ONLY to U.S. residents inside the 48 continental United States.
Chrysler/Force 2 stroke powerheads rebuilt
- 2 cyl - $925.00
- 3 cyl - $1,325.00
- 4 cyl - $1,790.00
- 5 cyl -
$2,475.00 (We no longer rebuild these powerheads.)
Mercury/Mariner 2 stroke powerheads rebuilt
- 2 cyl - $925.00
- 3 cyl - $1,395.00
- 4 cyl - $1,850.00
- 6 cyl Inline - (We no longer rebuild these powerheads.)
- 6 cyl V6 non chrome bore 225 HP 2.5 liter and below - $2,875.00 (Contact us for pricing on chrome bore blocks)
- 6 cyl V6 3.0 liter and up - $2,980.00
Johnson/Evinrude 2 stroke powerheads rebuilt
- 2 cyl - $925.00
- 3 cyl - $1,395.00
- 4 cyl 90 degree - $1,695.00 // 60 degree & Looper - $1,780.00
- 6 cyl 90 degree - $2,775.00 // 60 degree & Looper - $2,880.00
- 8 cyl - $3,290.00
Yamaha 2 stroke powerheads rebuilt
- 2 cyl - $925.00 (55 HP only)
- 3 cyl - $1,790.00
- 4 cyl - $2,275.00
- 6 cyl - $3,075.00
|
|
I want this! What do I need to do? |
|
or send us an email or call us 918-457-4099, with any questions or to make arrangements for your overhaul.
*Both ways shipping is included, standard ground or trucking carrier as required, to continental US destinations only. Faster return shipping is available at an additional charge.
** Prices posted are for normal standard overhaul. Required crank repair, block repair, sleeving, damaged connecting rods, and/or high performance modifications incur extra cost accordingly.
Our "lifetime" warranty statement is here
|
|
|
